Open this page at https://pelikhan.github.io/clicker-box/

This project turns a microcontroller into a mouse / keyboard clicker, optimized for button smashing games.

Materials

• 2 arcade buttons (optionally with LEDs)
• 1 board supported by maker
• A few jumper wires to connect everything
• A box to hold everything together
• 1 Micro-usb cable

Make Instructions

• Join all ground cables into a single wire and connect to GND pin.
• Connect ground wires to buttons (including optional LEDs)
• Connect jumper wire from one arcade button to the RST pin. This will allow you to switch between bootloader/app mode.
• Connect jumper wire from the other arcade button to pin D12 (or D4) depending on the board. This is the button that turns on/off the clicking.
• If you have a LED button, connect the jumper wire from the arcade button LED pin to pin A1. The button will blink as it clicks.
• Compile and download to your board.

Edit this project

To edit this repository in MakeCode.

• open https://maker.makecode.com/
• click on Import then click on Import URL
• paste https://github.com/pelikhan/clicker-box and click import

Blocks preview

This image shows the blocks code from the last commit in master. This image may take a few minutes to refresh.

Metadata (used for search, rendering)

• for PXT/maker